ZMX52 ALTO PROFESSIONAL

ALTO ZEPHYR ZMX52 5-channel mixer, 8 inputs, 1 combo mic input, built-in phantom power... A concentrate of qualities that makes the entire ALTO Zephyr series a success.

- ALTO ZMX52
- ZEPHYR Series
- 5-channel mixing console
- 8 entries
- 1 XLR/Jack combo microphone input.
- +48V phantom power included.
- Main, Tape, Headphone and Aux Jack 6.35mm outputs.
- Weight: 0.75kg.
- Dimensions: 128.1mm x 204mm x 38mm.

- Mono Channel (Ch. 1)
- Microphone input: Electronically balanced, discrete input configuration
- Frequency response: 20 Hz to 22 kHz, +/-1 dB
- Distortion (THDetN): ≦0.005% at +4 dBu, 1 kHz
- Gain range: 0 dB to 44 dB (Mic)
- Maximum Voltage Gain: 74 dB Ch. Mic Input → Main Mix out and Tape out, 80 dB Ch. Mic Input → Control room and phones
- SNR (Signal to Noise Rate): ≧110 dBu
- Phantom power (Mic Pin2/Pin3 and Pin1): +48 V

- Line input: balanced
- Frequency response: 20 Hz to 22 kHz, +/- 1 dB
- Distortion (THDetN): ≦0.005% at +4 dBu, 1 kHz
- Gain range: 15 dBu to 30 dBu

- Stereo channels (Ch. 2 - 5)
- Line input: Electronically balanced
- SNR (Signal to Noise Ratio): ≧110 dBu-
- Frequency response: 20 Hz to 22 kHz, +/- 1dB
- Distortion (THDetN): ≦0.005% at +4 dBu, 1 kHz
- Gain range: 0 dBu
- Maximum Voltage Gain: 30 dB Ch. Line → Main Mix out

- Impedance
- Microphone input: 3.9 kOhms
- All other inputs: 10 kOhms or Greater
- Tape Out: 1 kOhms
- All Other Outputs: 120 Ohms

- Equalization
- Mono per channel: High ±15 dB @ 12 kHz, Low ±15 dB @ 80 Hz

- Crosstalk
- Adjacent Input: ≦-80 dB @ 1KHz (Ch. 1 - 6)
- Input to Output: ≦-75 dB @ 1KHz (Stereo L/R, Ch. 1-4, Pan: panned hard left or right)

- Main Mix Section
- Output level: 0dBu Unbalanced, 1/4" Jacks
- Max out: +22dBu Unbalanced, 1/4" Jacks
- Noise (Bus noise): ≦-90 dB @ 20 Hz - 22 KHz (channel and Main level at 0 dB, other - at minimum, DSP mute)

- Power supply: 18 V, 500 mA
- Consumption: 9 W